home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Business Master (3rd Edition)
/
The Business Master (3rd Edition).iso
/
files
/
wordmisc
/
biblgic1
/
readme.doc
< prev
next >
Wrap
Text File
|
1992-06-14
|
6KB
|
164 lines
README.DOC
This file contains details of the latest changes to the
program, that were made since the instruction manual was
last revised.
It also contains instructions on installing BIBLOGIC.
VERSION 3.01
BIBLOGIC is distributed in two forms:
1) DISTRIBUTION DISKS. The program package is supplied on
two 360k floppy disks. An installation program is
supplied to simplify decompression and installation on
a hard disk. Follow the instructions below.
2) BULLETIN BOARD FILES. The program is supplied in the
form of two compressed files. Together, these files
contain all of the files on the distribution disks
except the installation program, which is not required.
Follow the instructions below.
QUICK START INSTRUCTIONS - DISTRIBUTION DISKS
To install BIBLOGIC from distribution disks into
C:\BIBLOGIC, put the first distribution disk in drive a: and
type:
A:INSTALL
then press <Enter>. Follow the on-screen instructions. When
prompted, insert the second disk.
It is recommended that you run the demo program included in
the distribution package. The installation program gives
instructions.
QUICK START INSTRUCTIONS - BULLETIN BOARD FILES
To install BIBLOGIC from BBS files, do the following:
1) Create a directory on your hard disk called "BIBLOGIC".
NOTE: It is possible, but not as straightforward, to
install BIBLOGIC in a subdirectory with a name other
than "BIBLOGIC". To run BIBLOGIC successfully, you will
need to read the appendices in the manual.
2) Decompress both of the distribution files into the
BIBLOGIC directory.
3) Check that the CONFIG.SYS file on your boot drive has
at least FILES=20 and BUFFERS=15. Reboot your system if
you change CONFIG.SYS.
It is recommended that you run the demo program included in
the distribution package. After uncompressing the files, go
to the BIBLOGIC directory and type DEMO<Enter>.
UPDATING FROM A PREVIOUS VERSION OF BIBLOGIC
If you are updating from a previous version, you need only
the following files:
DEMO.BAT
BIBLOGIC.DBD
*.EXE
*.OVL
Any new .PFF files you wish to use.
The easiest way to update the system is to install the new
system in a temporary directory (other than where the old
system is installed) and then copy over the files you need.
It is strongly recommended that you make a complete backup
of your existing BIBLOGIC installation before attempting to
update to the latest version.
It is recommended that you run the demo program included in
the distribution package. After updating, go to the new
BIBLOGIC directory and type DEMO<Enter>.
MANUALS
MANUAL.DOC contains the BIBLOGIC instruction manual.
SUPPL.DOC contains a supplement to the manual.
README.DOC is this file.
All of these files are in raw ASCII form and may be printed
on any ASCII printer with 80 or more columns and 66 or more
lines per page. The files contain form-feed characters
between pages and use back-space characters for underlining
and bold.
To print these files, copy them directly to your ASCII
printer or use the DOS print utility. For example:
COPY *.DOC LPT1:
or
PRINT *.DOC
NOTICE
This program is produced by a member of the Association of
Shareware Professionals (ASP). ASP wants to make sure that
the shareware principle works for you. If you are unable to
resolve a shareware-related problem with an ASP member by
contacting the member directly, ASP may be able to help. The
ASP Ombudsman can help you resolve a dispute or problem with
an ASP member, but does not provide technical support for
members' products. Please write to the ASP Ombudsman at 545
Grover Road, Muskegon, MI 49442 or send a CompuServe message
via CompuServe Mail to ASP Ombudsman 70007,3536.
ADDRESS
Biblogic Computer Services can be contacted at:
Biblogic Computer Services
P.O. Box 1424
Thousand Oaks
CA 91358-0424
U.S.A.
*** NEW *** Fax and CompuServe numbers (not shown elsewhere
in the documentation):
Fax: 1 (805) 493 0364
Compuserve: 75020,556
This file contains details of the latest changes to the program,
that were made since the instruction manual was last revised.
It also contains instructions on installing BIBLOGIC.